In wfview, Audio Output should be “Line 1 (Virtual Audio Cable” and Audio Input “Line 2 (Virtual Audio Cable)”. Once you have this running, it is simply a case of selecting the Audio Output and Input devices in wfview and your other software. I only enabled Line in the “Connected Source Lines”. The key settings are the Sample Rate (SR) which should be 48000 and BPS Range which should be 16bit.
In VAC You will need to create two “Cables” as per the image below:
VIRTUAL AUDIO CABLE MAC FREE FREE
VB-Cable is a free alternative that can be downloaded from it should work and we will hopefully get a chance to test it at some point. Windows Virtual Audio Cableįor Microsoft Windows users, we have tested Virtual Audio Cable which must be registered and costs $30 for non-commercial use. For USB connected rigs, you can simply use the USB audio devices provided by your rig. The following are only required for users who are connected to their rig via LAN/WiFi. We have tested configurations in both Windows and Linux but similar functionality can be achieved in MacOS using a tool called SoundFlower
VIRTUAL AUDIO CABLE MAC FREE SOFTWARE
These are effectively loopback sound cards that the transmit and receive audio are sent via wfview and allow your digital mode software (WSJT-X, Fldigi etc) to connect to it. It is necessary to create “virtual audio” connections. To be able to use wfview with digital modes like FT8, PSK etc.
0 kommentar(er)
